Boxed High-Silica Fire Blanket
Withstands 1100℃ — Woven from high-silica glass fiber, melting point up to 1700℃, tackling extreme heat in fire scenes.
A1 Non-Combustible + Silicone Coating — 0.5mm thickened high-density structure, flame-retardant and enhances impact resistance of the blanket surface.
Professional hemming anti-slip — Flame-retardant thread edging combined with fiberglass pull-tape, high strength for repeated use, won't come loose under emergency pulls.
Firmly grip the two flame-retardant pull straps with both hands and quickly lift out the high-silica fire blanket from the box.
Shake forward to fully unfold the blanket, ensuring its size covers the target fire source.
Push the unfolded blanket from around the fire point toward the center until the flame cluster is tightly covered, isolating it from air.
Keep covered for 30 minutes; only after thermal imaging or temperature drop can you slowly lift to check.
The high-silica surface silicone coating must not be exposed to open flames for prolonged direct burning; cut off the fire source and power as soon as possible after covering.
Do not fold and store before fully cooled; avoid burns and melting adhesion from residual heat.
After each use at a fire scene, clean with a dry cloth; if the coating is damaged or fibers are shedding, discard immediately.
In rescue scenarios, operate with heat-resistant gloves; do not hook or snag the blanket surface with sharp tools to prevent fiber breakage.
Need bulk purchasing or customized solutions?
Exclusive 1-on-1 consultant service · Free fire safety configuration plans