Vehicle Fire Blanket / Fiberglass Auto Fire Blanket
A1 fire performance — Completely non-combustible material, meets national standards, can be used to cover vehicles to isolate fire spread.
Four-corner hand-held pull-tapes — Each corner has a pull-tape, one person can quickly deploy and secure covering a burning vehicle.
High temperature tolerance — Monofilament glass fiber weave, melting point up to 1100°C, continuous service temperature 550°C, handle extreme fire situations.
Open the red PVC packaging bag, grab the four corner pull tapes and take out the fiberglass fire blanket.
With two people cooperating or one person pulling the four corners in sequence, fully unfold the folded fire blanket into a large coverage area.
Place the unfolded blanket over the vehicle from the roof or front direction, trying to cover the fire area, with the edges hanging down to the ground.
Use gloves or tools to press the edges of the blanket tightly against the vehicle body, reducing air ingress, to smother the fire.
After confirming the fire is extinguished and the temperature has dropped, slowly lift from one corner to check, and completely remove when safe.
When using, wear gloves and a mask to avoid skin and respiratory irritation from short glass fibers.
Store in a dry, ventilated environment; prolonged moisture exposure may reduce fiber strength and affect fire resistance.
If the blanket surface shows extensive damage or broken warp/weft threads, replace immediately; do not continue use.
Do not allow contact with exposed electrical wires during an electrical fire; disconnect the power supply before covering.
Need bulk purchasing or customized solutions?
Exclusive 1-on-1 consultant service · Free fire safety configuration plans