Flood Protection Covers
Abrasion and Scratch-Resistant Outer Layer——Silicone material combined with high-density weave, strong endurance, effectively resists wind and rain erosion.
Sturdy Support Design——Optional 203 stainless steel frame, 1 mm wall thickness, 2 cm diameter, frame weight 4.5 kg, easy to install, wind-resistant and stable.
Highly Visible Fabric——Camouflage oxford with waterproof coating, bright colors, enables quick location and deployment at flood control sites.
Fully unfold the flood protection cover and check that the surface has no damage and the waterproof coating is intact.
Place the waterproof coating side facing the protected materials or embankment surface, spread flat to cover, ensuring tight coverage.
If support is needed, install the stainless steel frame according to instructions and fix the cover fabric onto the frame.
Use ropes or sandbags to press down along the edges to prevent strong winds from lifting the cover.
Walk around and check all sides to ensure there are no gaps and rainwater cannot seep in.
Store flat and dry to prevent coating adhesion caused by long-term folding under pressure.
Handle the stainless steel frame with care during installation to prevent the metal edges from scratching the cover surface.
Clean and dry after use; store in a ventilated place to avoid moisture and mold.
Keep away from sharp objects to prevent puncturing the waterproof layer and affecting protection effectiveness.
Need bulk purchasing or customized solutions?
Exclusive 1-on-1 consultant service · Free fire safety configuration plans